Atomic Filament
Bed Bond 3D Print Bed Adhesive
Bed Bond 3D Print Bed Adhesive
In stock
Couldn't load pickup availability
Locks down when hot. Releases when cold. Best used with flexible build plates.
Atomic Bed Bond is a universal 3D printer bed adhesive built around our proprietary Thermal Lock formula. It grips aggressively on a heated build plate to prevent warping and corner lift on demanding prints, then relaxes its hold once the plate cools to room temperature—optimized for quick, effortless part release on flexible spring-steel build plates. 50 ml bottle with a precision spring-valve applicator.
🔥 Why Bed Bond
- Thermal Lock Formula: Extremely high grip when heated; reduces bond tension when cooled. Best used with flexible build plates for quick, tool-free part removal.
- Universal Compatibility: Formulated for PLA, PETG/PCTG, ABS/ASA/HIPS, Nylon (PA), PC, PC-ABS, carbon- and glass-fiber blends, plus high-temp polymers like PEEK, PEKK, PEI, and PPS.
- Protects Build Surfaces: Acts as a protective interface layer on PEI and coated plates to help prevent tear-out when printing high-adhesion copolyesters like PETG and PCTG.
- Fights Corner Lift: Locks down high-shrink engineering materials like ABS and ASA.
- No-Wash Touch-Ups: Reapply directly over worn spots or level with a quick spritz of water—no need to wash the entire plate between every print.
- 100% Water-Soluble: Rinses clean instantly with warm water and a soft cloth; no scraping or harsh chemical solvents required.
- Spring-Valve Applicator: Zero mess—fluid only dispenses when the sponge tip is pressed against the build plate.
- Proudly Made in Indiana, USA
🌡️ Dialed-In Surface & Temperature Guide
| Filament | Bed Temp | Recommended Surface |
|---|---|---|
| PLA / Silk / Matte / Tough PLA |
Atomic: 60°C Others: 55°C – 65°C |
Smooth / Textured Flexible PEI, Glass |
| PETG / PCTG |
Atomic: 79°C Others: 70°C – 85°C |
Smooth / Textured Flexible PEI, Glass |
| ABS / ASA |
Atomic: 110°C – 115°C Others: 95°C – 110°C |
Smooth Flexible PEI, Garolite / G10, Glass Rigid / Glass Notice: Best used on flexible plates. On rigid glass, allow bed to cool completely and apply warm water if needed to release—never pry stuck parts. |
| Nuclear Nylon / PA / CF |
Atomic: 80°C Others: 75°C – 95°C |
Garolite (G10), Smooth Flexible PEI |
| PC / PC-ABS | 110°C – 120°C | Smooth Flexible PEI, Engineering plates |
| TPU / TPE / PP / POM | — | Incompatible: Avoid TPU/TPE (risk of permanent over-adhesion) and PP/POM (will not bond). |
*For carbon or glass fiber blends of other materials (such as PETG-CF, PCTG-CF, or ABS-CF), use the recommended bed temperature for the base polymer.
⚡ How to Use
- Prep: Start with a clean, cold, dry build plate free of oils or dust.
- Apply: Shake gently, invert, and press the applicator tip straight down to open the spring valve. Spread a light, thin, uniform coat over the print zone. Do not squeeze the bottle hard.
- Dry & Heat: Turn on your bed heater after applying. Allow the thin film to dry completely as the bed heats up; once hot, the adhesive activates.
-
Release: Let the bed cool completely to room temperature. Flex the plate to pop parts off (on rigid plates, large flat prints may require warm water around the base).
Surface Notice: Due to Bed Bond's high holding strength, weak, worn, or poorly manufactured bed coatings may lift or delaminate. Atomic Filament is not responsible for build plate or coating damage. - Cleanup: Rinse clean with warm water when switching materials.
📄 Documentation & Safety
Flammable liquid and vapor. Contains isopropyl alcohol. Keep away from heat and open flames during application. Use in a well-ventilated area.
📖 View Full Quick-Start & Application Guide 📥 Download Safety Data Sheet (SDS PDF)
