ASA - Samples

ASA Sample Coils — Try Before You Commit

Not sure which ASA color is right for your project? Our 50 gram sample coils let you test colors and dial in your print settings before ordering a full spool.

🎨

Test Colors First

Each sample is 50 grams — enough to see exactly how each ASA color looks printed before committing to a full 1KG or 3.5KG spool. What you see on screen isn't always what you get off the build plate.

🔧

Dial In Your Settings

ASA requires specific print settings. Use a sample coil to fine-tune your nozzle temp (240–260°C), bed temp (90–110°C), and enclosure setup before your big print.

🇺🇸

Same Atomic Quality

Sample coils are cut from the same production runs as our full spools — prime grade virgin resin, premium colorants, and ±0.02mm tolerance.

📦

Ready to Go Full Spool?

Once you've found your color, grab a full 1KG or 3.5KG spool from our ASA collection →

💧 ASA Print Settings Reminder: Nozzle 240–260°C • Bed 90–110°C • Heated enclosure strongly recommended • Dry at 80°C for 6+ hours if left out.

IF YOU CAN THINK IT, YOU CAN MAKE IT. 🚀

9 products