Smoke Blue Carbon Fiber Extreme PETG PRO: finish and uses
An opaque smoke blue with a carbon-fiber-textured finish, lighter than the Dark Blue Carbon Fiber PETG option. This grade uses PETG resin with USA-made milled carbon fiber rather than carbon powder or dust. Made in Indiana, USA.
Consider it for technical models, fixtures and functional parts where rigidity and a smoke blue finish suit the design. Added stiffness does not guarantee greater impact toughness in every direction; evaluate part geometry, layer orientation and intended loads.
Indicative color reference: #375D71, attributed to Filamentcolors.xyz and not independently verified. Screens, lighting and print settings affect perceived color; a flat hex value cannot capture the textured finish.
Printing Smoke Blue Carbon Fiber Extreme PETG PRO
Published nozzle temperature: 238–265°C. Heated bed: 80°C ±10°C. Use a nozzle diameter of 0.40 mm or larger. Tune flow, cooling, retraction and temperature for your printer, build surface and part geometry.
The filament is mildly abrasive to print nozzles. Use a hardened or wear-resistant nozzle suitable for carbon-fiber-filled materials. Check your printer and feeding-system manufacturer’s guidance for filled filament rather than assuming compatibility with every setup.
Quality and specifications
Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for spool and diameter details.
Spool returns
Spool-return program details and current terms
Smoke Blue Carbon Fiber Extreme PETG PRO FAQ
How does it differ from Dark Blue?
Smoke Blue is the lighter blue option compared with Dark Blue Carbon Fiber PETG. Compare printed samples under the same lighting when choosing between them.
Is Smoke Blue translucent?
No. This carbon-fiber grade prints with an opaque, textured smoke blue finish.
What nozzle should I use?
Use a hardened or wear-resistant nozzle suitable for abrasive filament, 0.40 mm or larger.
What temperatures are listed?
Published starting guidance is 238–265°C nozzle and 80°C ±10°C heated bed. Tune for your printer and build surface.
Can I try a sample first?
Smoke Blue Carbon Fiber Extreme PETG sample coil
