1 1

Atomic Filament

Perfect Red ASA Filament AMS Compatible

Perfect Red ASA Filament AMS Compatible

$ 32.99
$ 32.99
Sale Sold out
Shipping calculated at checkout.

In stock

Size

Perfect Red ASA combines a bold, true red color with UV and weather resistance for outdoor mounts, brackets, enclosures and functional prints. Made from premium virgin ASA resin.

1.75 mm filament · 1 kg spool · ±0.02 mm diameter tolerance

An enclosure is strongly recommended. Use appropriate ventilation.

Print settings: 240–260°C nozzle · 90–110°C bed · part cooling low or off. Keep the printing area warm and draft-free. If the filament has been left out, dry it at 80°C for at least 6 hours before printing.

Want to check the color first? Try a Perfect Red ASA sample coil.

View full details

Perfect Red ASA: bold color for outdoor projects

A bold, true red ASA for outdoor mounts, brackets, enclosures and functional prototypes. Its UV and weather resistance makes it a practical choice for parts exposed to sunlight and changing conditions.

Printing Perfect Red ASA

Start with a nozzle temperature of 240–260°C and a bed temperature of 90–110°C. Adjust for your printer, build surface and part geometry.

An enclosure is strongly recommended to keep the printing environment warm and draft-free. Use appropriate ventilation; an enclosure does not replace it.

Drying and storage

If the filament has been left out, dry it at 80°C for at least 6 hours before printing. Confirm that both your drying equipment and spool are suitable for that temperature. Store sealed with desiccant between uses.

Material and quality

Made from premium virgin ASA resin and rich red colorant. Published diameter tolerance: ±0.02 mm. This product is supplied as 1.75 mm filament on a 1 kg spool.

Perfect Red ASA FAQ

Is it suitable for outdoor use?

Yes. ASA offers UV and weather resistance for outdoor parts. Choose a part design and material suitable for the expected load and exposure conditions.

Do I need an enclosure?

An enclosure is strongly recommended, particularly for larger parts. A warm, stable environment helps reduce warping and layer separation.

Does it need drying?

If it has been left out, dry at 80°C for at least 6 hours with suitable equipment and a temperature-compatible spool.

Can I try a sample first?

Yes. Try a Perfect Red ASA sample coil to check the color and test your printing setup before choosing a full spool.