Neon Yellow UV Reactive ABS Filament
2Neon Yellow UV Reactive ABS
Available in 1.75mm
Intense Neon Yellow ABS filament
Recommended print temps 230-250C. Prints with less warp than most other resins. Excellent rating from customers.
Quality / Specs
Print temp 235 to 250C
Diameter (volumetric variation XY combined) + - 0.02 or better
Roundness ( ovality ) + - 0.02 mm or better
- Reviews
- Questions
- lights
- Raise3d N2s
- glow
- print settings
- filament
United StatesGlowing Success!
Filament printed up perfectly at our usual print settings for our Raise3d N2s and N2+ at 220-225. Print quality was great and the glow under black and blue lights is awesome!
Atomic Filament
Thanks so much Evanita!
Low odor, Low warp, Low shrink
This is my first venture into printing ABS on my Prusa MK3. Printing in a lack enclosure around 40-42C. They have this formulation figured out. I measured all of my parts and shrink was only around 0.7% or so. Experienced very little warp. I do suggest a 110C bed and stick to recommending print temps. I chose 240C. I also used just a touch of fan to keep overhangs from drooping. The quality of this ABS is amazing. Very little odor. I will warn you. You will need sunglasses if you choose the neon reactive yellow. Tacky as can be, fits my personality well.
We Also Recommend
