Neon Orange UV Reactive Opaque PCTG PRO: finish and uses
A vivid neon orange with an opaque finish and a fluorescent response under UV light. Consider it for bold models, display pieces and creative projects where color is part of the design. Made in Indiana, USA.
UV reactive describes the visible effect under UV illumination, not lasting glow after the light is removed or a UV-weathering rating. This is an opaque orange, rather than the translucent Bright Orange PCTG PRO.
Indicative color reference: #FF6334, attributed to Filamentcolors.xyz and not independently verified. Screens and print settings affect perceived color, and a hex value cannot represent UV fluorescence. Compare a sample under your intended lighting.
Printing Neon Orange UV Reactive Opaque PCTG PRO
Published nozzle temperature: 255–272°C. Heated bed: approximately 80°C, with a 70–90°C starting range. Adjust for your printer, build surface and part geometry.
An existing Atomic PETG PRO profile can be a starting point, but test rather than assuming every setting transfers unchanged. Tune temperature, cooling, flow and retraction for your setup.
Functional performance
PCTG PRO is a toughness-focused option for functional prints. Match your design and printing setup to the expected loads and operating conditions. Chemical, oil and grease compatibility depends on the substance, concentration, exposure time and temperature; test a representative part for your application.
Quality and specifications
Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for diameter and spool details.
Spool returns
See our sustainability initiatives for spool-return program details and current terms.
Neon Orange UV Reactive Opaque PCTG PRO FAQ
Is this orange opaque or translucent?
This is the opaque Neon Orange option. It is separate from Translucent Bright Orange PCTG PRO.
What does UV reactive mean?
The neon orange color fluoresces under UV illumination. The visible effect depends on the lighting used.
Does it glow in the dark after the light is removed?
The listed effect is fluorescence under UV light, not a claim of lasting glow in darkness.
Can I use my Atomic PETG PRO profile?
Use it as a starting point, then test and tune. The published nozzle range is 255–272°C, with bed guidance of 80°C ±10°C.
Can I try a sample first?
Yes. Try a Neon Orange Opaque UV Reactive PCTG PRO sample coil to check the color, UV effect and printer settings.
