Skip to product information
1 of 1

Atomic Filament

Metallic Silver Opaque PCTG PRO Filament AMS Compatible

Metallic Silver Opaque PCTG PRO Filament AMS Compatible

Regular price $ 34.49
Regular price Sale price $ 34.49
Sale Sold out
Shipping calculated at checkout.

In stock

Size

Metallic Silver Opaque PCTG PRO has a glossy, pearly aluminum-like appearance for prototypes, display models and metal-look prints. Made in Indiana, USA. The v2 formulation is described as non-abrasive.

Start with a nozzle temperature of 255–272°C and a heated bed around 80°C (±10°C), then tune for your printer and part.

Explore the finish with a Metallic Silver Opaque PCTG PRO sample coil.

View full details

Metallic Silver Opaque PCTG PRO: finish and uses

An opaque silver with a glossy, pearly aluminum-like appearance. The v2 finish emphasizes shine and metallic-looking luster for prototypes, display models and metal-look machine-part designs. Made in Indiana, USA.

The formulation is described as non-abrasive and formulated to reduce brittleness. The aluminum-like appearance does not mean a printed plastic part has the mechanical or thermal properties of aluminum.

Indicative color reference: #9B9FA0, attributed to Filamentcolors.xyz and not independently verified. A flat hex value cannot capture pearly sheen; lighting, viewing angle, surface shape and print settings affect the appearance.

Printing Metallic Silver Opaque PCTG PRO

Published nozzle temperature: 255–272°C. Heated bed: approximately 80°C, with a 70–90°C starting range. Adjust for your printer, build surface and part geometry.

An existing Atomic PETG PRO profile can be a starting point, but test rather than assuming every setting transfers unchanged. Tune temperature, cooling, flow and retraction for your setup.

Functional performance

PCTG PRO is a toughness-focused option for functional prints. Match your design and printing setup to the expected loads and operating conditions. Chemical, oil and grease compatibility depends on the substance, concentration, exposure time and temperature; test a representative part for your application.

Quality and specifications

Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for diameter and spool details.

Spool returns

See our sustainability initiatives for spool-return program details and current terms.

Metallic Silver Opaque PCTG PRO FAQ

What does the silver finish look like?

The v2 finish is opaque silver with a glossy, pearly aluminum-like appearance. Compare a sample print under your intended lighting.

Is this formulation abrasive?

The product is described as non-abrasive. Do not assume every metallic-looking or filled filament shares the same hardware requirements.

Can it replace an aluminum machine part?

Appearance alone does not establish suitability. Evaluate the printed part’s design, loads and operating conditions rather than treating a metal-like finish as metal-like performance.

Can I use my Atomic PETG PRO profile?

Use it as a starting point, then test and tune. Published guidance is 255–272°C nozzle and 80°C ±10°C bed.

Can I try a sample first?

Yes. Try a Metallic Silver Opaque PCTG PRO sample coil to check the finish and printer settings.