Light Gray PCTG PRO: finish and uses
A clean, light gray finish that highlights details and surface textures on prototypes, tools, enclosures and functional parts. Made in Indiana, USA.
Indicative color reference: #A2A3A0, attributed to Filamentcolors.xyz and not independently verified. Lighting, screens and print settings affect perceived color. Compare a physical sample for color-sensitive projects.
Printing Light Gray PCTG PRO
Published nozzle temperature: 255–272°C. Heated bed: approximately 80°C, with a 70–90°C starting range. Adjust for your printer, build surface and part geometry.
An existing Atomic PETG PRO profile can be a starting point, but test rather than assuming every setting transfers unchanged. Tune temperature, cooling, flow and retraction for your setup. Warping and layer bonding depend on the part design and printing conditions.
Functional performance
PCTG PRO is a toughness-focused choice for functional prints. Match your design and printing setup to the expected loads. Chemical, oil and grease compatibility depends on the substance, concentration, exposure time and temperature; test a representative part for your application.
Quality and specifications
Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for diameter and spool details.
Spool returns
See our sustainability initiatives for spool-return program details and current terms.
Light Gray PCTG PRO FAQ
What does Light Gray look like?
It has a clean, light gray finish suited to showing details and surface textures. Lighting and print settings affect appearance; try a sample when matching another part.
Can I use my Atomic PETG PRO profile?
Use it as a starting point, then test and tune. The published nozzle range is 255–272°C, with bed guidance of 80°C ±10°C.
Will it print without warping?
No setting or material description guarantees a warp-free result. Part geometry, build-surface adhesion and printing conditions affect the outcome.
Is the hex color an exact match?
No. #A2A3A0 is an indicative third-party reference, not a verified color-match specification. A sample print gives a more useful physical comparison.
Can I try a sample first?
Yes. Try a Light Gray Opaque PCTG PRO sample coil to check the color and test your printing setup.