Dark Gray ASA Filament AMS Compatible

Dark Gray ASA: material and uses

Dark Gray ASA combines a neutral dark gray color with UV and weather resistance for outdoor fixtures, brackets, enclosures and functional prints. Made from premium virgin ASA resin.

Printing Dark Gray ASA

Start with a nozzle temperature of 240–260°C and a bed temperature of 90–110°C. Adjust for your printer, build surface and part geometry.

A heated build plate is required and an enclosure is strongly recommended. Keep the printing environment warm and draft-free. Use appropriate ventilation; an enclosure does not replace it.

Drying and storage

If the filament has been left out, dry at 80°C for at least 6 hours before printing. Confirm that your dryer and spool are suitable for that temperature. Store sealed with desiccant between uses.

Material and quality

Published diameter and roundness tolerances: ±0.02 mm. Supplied as 1.75 mm filament on a 1 kg spool.

Made in Indiana, USA using premium virgin ASA resin and colorant.

Dark Gray ASA FAQ

Is it suitable for outdoor use?

Yes. ASA offers UV and weather resistance. Choose a part design and material suitable for the expected load and exposure conditions.

Do I need an enclosure?

An enclosure is strongly recommended, especially for larger prints. A warm, stable printing environment helps reduce warping and layer separation.

Does it need drying?

If left out, dry at 80°C for at least 6 hours using suitable equipment and a temperature-compatible spool.

Can I try a sample first?

Yes. Try a Dark Gray ASA sample coil to check the color and test your printing setup.