Cosmic Graphite Opaque PCTG PRO: finish and uses
A dark, smoky graphite base accented with silver dust and larger silver flecks for a cosmic effect. Consider it for display pieces, artistic models and functional prints where a dark, flecked finish suits the design. Made in Indiana, USA.
This is the opaque Cosmic Graphite option. Lighting, viewing angle, surface shape and print orientation affect how the silver accents catch the light.
Indicative color reference: #4E5051, attributed to Filamentcolors.xyz and not independently verified. A flat hex value cannot capture the silver flecks; screens and print settings affect perceived color.
Printing Cosmic Graphite Opaque PCTG PRO
Published nozzle temperature: 255–272°C. Heated bed: approximately 80°C, with a 70–90°C starting range. Adjust for your printer, build surface and part geometry.
An existing Atomic PETG PRO profile can be a starting point, but test rather than assuming every setting transfers unchanged. Tune temperature, cooling, flow and retraction for your setup.
Functional performance
PCTG PRO is a toughness-focused option for functional prints. Match your design and printing setup to the expected loads and operating conditions. Chemical, oil and grease compatibility depends on the substance, concentration, exposure time and temperature; test a representative part for your application.
Quality and specifications
Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for diameter and spool details.
Spool returns
See our sustainability initiatives for spool-return program details and current terms.
Cosmic Graphite Opaque PCTG PRO FAQ
What creates the cosmic appearance?
The dark smoky graphite base is accented with silver dust and larger silver flecks that catch the light.
Is Cosmic Graphite translucent?
This product is the opaque Cosmic Graphite PCTG PRO option.
Will the flecks look identical from every angle?
Lighting, viewing angle, print orientation and surface shape affect the appearance. Compare a small print under your intended lighting.
Can I use my Atomic PETG PRO profile?
Use it as a starting point, then test and tune. Published guidance is 255–272°C nozzle and 80°C ±10°C bed.
Can I try a sample first?
Yes. Try a Cosmic Graphite PCTG sample coil to check the finish and printer settings.