Bronze Metallic Opaque PCTG PRO: finish and uses
A rich bronze tone with an opaque finish and metallic-looking shimmer. Consider it for sculptures, costume props, historical replicas and decorative models with an antique-metal appearance. Made in Indiana, USA.
Lighting, viewing angle, surface geometry and print orientation affect how the metallic finish appears. Compare a printed sample under your intended lighting.
Indicative color reference: #64524C, attributed to Filamentcolors.xyz and not independently verified. A flat hex reference cannot represent metallic shimmer; screens and print settings also affect perceived color.
Printing Bronze Metallic Opaque PCTG PRO
Published nozzle temperature: 255–272°C. Heated bed: approximately 80°C, with a 70–90°C starting range. Adjust for your printer, build surface and part geometry.
An existing Atomic PETG PRO profile can be a starting point, but test rather than assuming every setting transfers unchanged. Tune temperature, cooling, flow and retraction for your setup.
Functional performance
PCTG PRO is a toughness-focused option for functional prints. Match your design and printing setup to the expected loads and operating conditions. Chemical, oil and grease compatibility depends on the substance, concentration, exposure time and temperature; test a representative part for your application.
Quality and specifications
Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for diameter and spool details.
Spool returns
See our sustainability initiatives for spool-return program details and current terms.
Bronze Metallic Opaque PCTG PRO FAQ
Is Bronze Metallic opaque or translucent?
This is the opaque Bronze Metallic option, chosen for a bronze-colored surface rather than a translucent finish.
What projects suit this finish?
Consider sculptures, costume props, historical replicas and decorative pieces where a bronze appearance supports the design. Evaluate functional parts for their actual loads and conditions.
Will the shimmer look identical from every angle?
Lighting, viewing angle, print orientation and surface shape affect the appearance. Test a small part in its intended display setting.
Can I use my Atomic PETG PRO profile?
Use it as a starting point, then test and tune. The published nozzle range is 255–272°C, with bed guidance of 80°C ±10°C.
Can I try a sample first?
Yes. Try a Bronze Metallic Opaque PCTG PRO sample coil to check the color, finish and printer settings.
