Bright White Opaque PCTG PRO: finish and uses
A crisp, opaque white finish for functional parts, enclosures, jigs and display pieces. Made in Indiana, USA using the same premium pigments found in Atomic PETG PRO.
Indicative color reference: #DEE5F5, attributed to Filamentcolors.xyz. This reference has not been independently verified. Lighting, screens and print settings affect perceived color; use a sample coil when matching a physical part.
Printing Bright White Opaque PCTG PRO
Published nozzle temperature: 255–272°C. Heated bed: approximately 80°C, with a 70–90°C starting range. Adjust for your printer, build surface and part geometry.
An existing Atomic PETG PRO profile can be a starting point, but test rather than assuming every setting transfers unchanged. Tune temperature, cooling, flow and retraction for your setup.
Functional performance
PCTG PRO is a toughness-focused choice for functional prints. Match the design and printing setup to the expected loads. Chemical, oil and grease exposure should be evaluated for the specific substance, concentration, exposure time and operating conditions.
Quality and specifications
Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for diameter and spool details.
Need a larger spool? See the 3.5 kg Bright White Opaque PCTG PRO listing for its current options and availability.
Spool returns
See our sustainability initiatives for spool-return program details and current terms.
Bright White Opaque PCTG PRO FAQ
Is this an opaque white or a natural translucent filament?
Bright White Opaque is the pigmented white option, not a clear or natural translucent finish. Appearance still depends on lighting, wall thickness and print settings.
Can I use my Atomic PETG PRO profile?
Use it as a starting point, then test and tune. The published nozzle range is 255–272°C, with bed guidance of 80°C ±10°C.
Is the hex color an exact match?
No. #DEE5F5 is an indicative third-party reference, not a verified color-match specification. Print a sample to compare it with your project.
Is a larger spool available?
There is a separate 3.5 kg spool listing. Check that page for current availability and options.
Can I try a sample first?
Yes. Try a Bright White Opaque PCTG sample coil to check the color and test your printer settings.
