Skip to product information
1 of 1

Atomic Filament

Translucent Neon Hot Pink UV Reactive PCTG PRO Filament AMS Compatible

Translucent Neon Hot Pink UV Reactive PCTG PRO Filament AMS Compatible

Regular price $ 34.49
Regular price Sale price $ 34.49
Sale Sold out
Shipping calculated at checkout.

In stock

Size

Translucent Neon Hot Pink UV Reactive PCTG PRO combines bold pink color with a fluorescent effect under UV light. Made in Indiana, USA.

May look orange/red on the roll. Printed parts show the translucent neon hot pink effect; thinner walls and less infill can enhance it. UV reactive does not mean glow-in-the-dark.

Start with a nozzle temperature of 255–272°C and a heated bed around 80°C (±10°C), then tune for your printer and part. Try a Translucent Neon Hot Pink UV Reactive PCTG PRO sample coil first.

View full details

Translucent Neon Hot Pink UV Reactive PCTG PRO: finish and uses

A bold, translucent neon hot pink with a fluorescent effect under UV light for displays, cosplay accessories, signs and artistic projects. Made in Indiana, USA.

The filament may appear more orange or red than pink on the roll. Printed parts show the translucent neon hot pink effect; thinner walls and less infill can enhance it. Balance these choices with your part’s strength requirements.

UV reactive describes fluorescence under UV illumination, not lasting glow after the light is removed or a UV-weathering rating. Wall thickness, internal structure and lighting affect the result.

Indicative color reference: #EE5A88, attributed to Filamentcolors.xyz and not independently verified. A hex reference cannot represent translucency or UV fluorescence; compare a physical sample under your intended lighting.

Printing Translucent Neon Hot Pink UV Reactive PCTG PRO

Published nozzle temperature: 255–272°C. Heated bed: approximately 80°C, with a 70–90°C starting range. Adjust for your printer, build surface and part geometry.

An existing Atomic PETG PRO profile can be a starting point, but test rather than assuming every setting transfers unchanged. Tune temperature, cooling, flow and retraction for your setup.

Functional performance

PCTG PRO is a toughness-focused option for functional prints. Match your design and printing setup to the expected loads and conditions. Chemical, oil and grease compatibility depends on the substance, concentration, exposure time and temperature; test a representative part for your application.

Quality and specifications

Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for diameter and spool details.

Spool returns

See our sustainability initiatives for spool-return program details and current terms.

Translucent Neon Hot Pink UV Reactive PCTG PRO FAQ

Why does the spool look orange or red?

This product can appear more orange or red on the roll. Evaluate a printed sample to see its translucent neon hot pink appearance.

How can I enhance the neon effect?

Thinner walls and less infill can enhance the effect. Test under your intended lighting and retain enough material for the part’s required strength.

Does it glow after the UV light is removed?

The listed effect is fluorescence under UV illumination, not a claim of lasting glow in darkness.

Can I use my Atomic PETG PRO profile?

Use it as a starting point, then test and tune. The published nozzle range is 255–272°C, with bed guidance of 80°C ±10°C.

Can I try a sample first?

Yes. Try a Translucent Neon Hot Pink UV Reactive PCTG PRO sample coil to check the printed color, UV effect and printer settings.