Indigo Golden Sparkle Translucent PCTG PRO: finish and uses
A deep indigo blue base with golden sparkle particles and a translucent finish. Consider it for decorative models, display pieces and artistic projects that catch the light. Made in Indiana, USA.
Lighting, viewing angle and surface geometry affect the sparkle. Wall thickness, infill and layer structure affect how much light passes through; translucent does not mean glass-like transparency.
Indicative color reference: #5D6698, attributed to Filamentcolors.xyz and not independently verified. A flat hex value cannot capture golden sparkle or translucency. Compare a physical sample under your intended lighting.
Printing Indigo Golden Sparkle Translucent PCTG PRO
Published nozzle temperature: 255–272°C. Heated bed: approximately 80°C, with a 70–90°C starting range. Adjust for your printer, build surface and part geometry.
An existing Atomic PETG PRO profile can be a starting point, but test rather than assuming every setting transfers unchanged. Tune temperature, cooling, flow and retraction for your setup.
Functional performance
PCTG PRO is a toughness-focused option for functional prints. Match your design and printing setup to the expected loads and operating conditions. Chemical, oil and grease compatibility depends on the substance, concentration, exposure time and temperature; test a representative part for your application.
Quality and specifications
Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for diameter and spool details.
Spool returns
See our sustainability initiatives for spool-return program details and current terms.
Indigo Golden Sparkle Translucent PCTG PRO FAQ
What color is the base?
The base is deep indigo blue, with golden sparkle particles that catch the light.
Is it opaque or translucent?
This is the translucent option. Thicker walls and denser infill can make the printed part appear less translucent.
Will the sparkle look the same from every angle?
No single view captures the finish. Lighting, viewing angle, print orientation and surface shape affect its appearance; test a small print where you plan to display it.
Can I use my Atomic PETG PRO profile?
Use it as a starting point, then test and tune. The published nozzle range is 255–272°C, with bed guidance of 80°C ±10°C.
Can I try a sample first?
Yes. Try an Indigo Golden Sparkle Translucent PCTG PRO sample coil to check the color, sparkle and printer settings.