Gemstone Ruby Red Translucent PCTG PRO: finish and uses
A rich, ruby-inspired red with a translucent finish for decorative pieces, cosplay props and designs illuminated by LEDs. Made in Indiana, USA. PCTG PRO is also a toughness-focused option for functional parts.
The illuminated effect comes from light passing through the print, not a claim of glow-in-the-dark behavior. Wall thickness, infill, layer structure, surface finish and lighting affect translucency and perceived color.
Indicative color reference: #A9393B, attributed to Filamentcolors.xyz and not independently verified. A hex reference cannot describe transparency; compare a physical sample for your project.
Printing Gemstone Ruby Red Translucent PCTG PRO
Published nozzle temperature: 255–272°C. Heated bed: approximately 80°C, with a 70–90°C starting range. Adjust for your printer, build surface and part geometry.
An existing Atomic PETG PRO profile can be a starting point, but test rather than assuming every setting transfers unchanged. Tune temperature, cooling, flow and retraction for your setup.
Functional performance
Match your design and printing setup to the expected loads and operating conditions. Chemical, oil and grease compatibility depends on the substance, concentration, exposure time and temperature; test a representative part for your application.
Quality and specifications
Published diameter and roundness tolerances: ±0.02 mm or better. Refer to the available variant above for diameter and spool details.
Spool returns
See our sustainability initiatives for spool-return program details and current terms.
Gemstone Ruby Red Translucent PCTG PRO FAQ
Is this an opaque red?
No. This is the translucent ruby red option. Finished appearance depends on the part geometry, printing setup and lighting.
Does it glow in the dark?
The described effect is the appearance of a translucent print when illuminated. It is not a glow-in-the-dark claim.
Will thick parts still look translucent?
Thicker walls and dense infill can make a part appear darker and less translucent. Test the wall thickness and internal structure you intend to use.
Can I use my Atomic PETG PRO profile?
Use it as a starting point, then test and tune. The published nozzle range is 255–272°C, with bed guidance of 80°C ±10°C.
Can I try a sample first?
Yes. Try a Gemstone Ruby Red Translucent PCTG PRO sample coil to check the appearance and test your printer settings.