3.5 kg Carbon Fiber Black ASA: material and uses
The larger-spool Carbon Fiber Black ASA option offers a deep opaque black color with a slightly textured finish. Consider it for outdoor brackets, enclosures, fixtures and models where ASA’s UV resistance and carbon-fiber reinforcement suit the design.
Added rigidity is not a guarantee of greater impact toughness or a particular service temperature. Evaluate the printed part against its expected loads, temperature and exposure conditions.
Printing 3.5 kg Carbon Fiber Black ASA
Published nozzle temperature: 240–260°C. Heated bed: 110–120°C. A heated build plate is required. Use a wear-resistant nozzle, 0.40 mm minimum; 0.50 mm is recommended. This filament is mildly abrasive to print nozzles.
An enclosure is strongly recommended to help reduce warping. Keep the printing environment warm and draft-free and avoid direct cooling drafts. Use appropriate ventilation; an enclosure does not replace ventilation. Tune cooling and other settings for your printer and part geometry.
Larger-spool handling
Check that your spool holder accommodates the 3.5 kg roll and lets it turn freely. Arrange a smooth feeding path without unnecessary drag. Do not assume a larger spool fits an enclosed feeding system.
Quality and specifications
Published diameter and roundness tolerances: ±0.02 mm or better. This listing is the 3.5 kg spool option; confirm the available variant above matches your printer’s filament diameter.
3.5 kg Carbon Fiber Black ASA FAQ
Why choose ASA for an outdoor project?
ASA offers UV resistance. Match the design and material to the expected weather exposure, temperature and mechanical loads, and test the finished part.
What nozzle should I use?
Use a wear-resistant nozzle, 0.40 mm minimum; 0.50 mm is recommended. Carbon fiber can wear standard brass nozzles.
What temperatures are listed?
Published starting guidance is 240–260°C nozzle and 110–120°C heated bed. Tune for your printer and build surface.
Does the 3.5 kg spool need a different holder?
Check your holder’s capacity and fit before printing. The roll must turn freely without adding excessive drag to the feeding path.
Can I try a sample first?
Yes. Try a Carbon Fiber Black ASA sample coil to check the finish and printing setup before choosing the larger spool.
