Menu
Cart
Smoke Blue CARBON FIBER Extreme PETG

Smoke Blue CARBON FIBER Extreme PETG

1 review

MFG Atomic USA

  • $ 5399


 

Smoke Blue CARBON FIBER INFUSED Extreme PETG PRO

Same formula as our very popular Extreme Black CF PETG now available in a lighter blue compared to our dark blue CF PETG.

Prints with a smoke blue CF texture & no transparency.

Filament and parts are NOT brittle like some other CF products. Excellent for professional looking technical prints.

Engineering grade PETG resin with USA made premium MILLED carbon fiber NOT powder or dust.

PETG is a newer printing filament and has the advantage of printing easily like PLA, but offering higher temp and impact resistance like ABS.

 

Carbon fiber infused filament benefits:

  • Increased rigidity / strength
  • Highly desirable texture / look
  • Greatly reduced part shrink / warp
  • Greatly reduced stringing / angel hairs
  • Printed parts hold better details / sharp corners

 

Quality / Specs

Print nozzle temp -  238 - 265C

Print nozzle size -  0.40mm or larger

Heated Bed temp - 80c +- 10c

Diameter (volumetric variation XY combined) + - 0.02mm or better

Roundness ( ovality ) + - 0.02 mm or better

* mild abrasive to print nozzles.

Customer Reviews
5.0 Based on 1 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
GN
05/31/2021
George N.
This is some truly incredible stuff.

Atomic has really knocked it out of the park again with this color of the CARBON FIBER extreme PETG. I'm really bummed I didn't buy multiple reels of this before it sold out. Can't wait until it is back in stock again! Going to reprint all the parts for my MK3S+ with it. The blue is stunning, and it's the same awesome quality and consistency of their other filaments. Super strong and lightweight! Which is great for so many applications. I personally print this on the lower end temp range (between 235-240C), but I have a modified copper hotend with an upgraded heater and thermistor. Stock PETG Prusaslicer fan settings, and 90C bed temp. It prints magically. Barely any stringing at all, fantastic layer adhesion, and has a beautiful mixture of matte and shiny look depending on the lighting. You really can't go wrong with it! Thanks, Atomic!


We Also Recommend