X
Menu
Cart

CARBON FIBER Nuclear Nylon v3

28 reviews

Atomic Filament

  • $ 8999


Extreme Duty Carbon Fiber Black Nuclear Nylon v3 (Read complete page please)

 Available in ONE Pound & 1 Kilo (2.2 lbs) Black

 Nuclear Nylon Technical data (TDS) click here

This nylon is exceptionally stiff & strong and EASY to print with little to no warpage.

Prints exceptionally well with warm (60C) glass coated with PVA or Magigoo. Each roll includes a reusable moisture indicator card.

Engineering grade alloyed PA Copolymer resin, adhesion promoters , impact modifiers & USA made premium MILLED carbon fiber NOT powder or dust.

 

Filament and parts are NOT overly brittle like some other CF products. Excellent for professional looking & strong technical prints.

 

****This product is intended to be printed by EXPERIENCED NYLON users with the capability to store and handle nylon filaments while keeping them DRY / being able to DRY them when needed. This product must be stored properly and kept dry BEFORE AND DURING PRINTING, moisture will result in weak/failed prints and not valid for warranty claims.**** 

**PRODUCT IS SHIPPED DRY AND READY TO USE WITH A REUSABLE MOISTURE INDICATING CARD**

 NUCLEAR NYLON SDS SHEET CLICK HERE

Carbon fiber infused filament benefits:

  • Massive increase to rigidity / strength
  • Highly desirable texture / look
  • Greatly reduced part shrink / warp
  • Greatly reduced stringing / angel hairs
  • Printed parts hold better details / sharp corners

 

Quality / Specs

 Print nozzle temp -  260-280C

       Print nozzle size -  0.40mm minimum or 0.50 or larger is best

       Print Speed - 35 to 45 mm sec. - Hardened nozzle recommended.

 Heated Bed temp - 60c - Glass with PVA or Magigoo OR other nylon friendly adhesion platforms.

 Diameter (volumetric variation XY combined) + - 0.05mm or better

 Roundness ( ovality ) + - 0.04 mm or better

* this product is abrasive to print nozzles / hardware.

Customer Reviews
4.8 Based on 28 Reviews
5 ★
89% 
25
4 ★
4% 
1
3 ★
4% 
1
2 ★
3% 
1
1 ★
0% 
0
Customer Photos
95reviewers would recommend this product Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • filament
  • stuff
  • nylon
  • parts
  • warping
  • rolls
  • Atomic
  • strength
  • PETG
  • work
JJ
09/09/2022
Jay J.
United States United States
I recommend this product

10/5 stars absolutely love this stuff!

The strongest filament I've ever printed was Taulman's glass fiber reinforced nylon but its temperamental...until I took the plunge and spent $50 on 1/2kg. This stuff is unbelievable, it prints beautifully even at the lower end of the temp range which means those who have an Ender 3 with an all metal hotend can reach those temps (260C) with stock firmware, heater and thermistor. I do not have a stock Ender 3 in fact I put a lot of money into it to make it so much worse that was a year ago and it prints like a Prusa now and with this CF nylon it looks like injection molded parts and has the strength of them as well. Even works with supports which regular nylon welds itself. I'm thinking of buying the big roll next....

Atomic Filament CARBON FIBER Nuclear Nylon v3 Review
GS
08/26/2022
Gary S.
United States United States
I recommend this product

Go to filament

I've used CF nylon from other suppliers, and the atomic filament's always produces quality parts. I use 3D printing to make test fixtures for work, so reliability is a must since my paycheck depends on it.

GL
08/18/2022
Gary L.
United States United States
I recommend this product

Prints great and wow is it tough

I made all the necessary preparations to print nylon, filament dryer, tent, pre dried the filament and all I can say is wow! It prints exceptionally well. At this point that should come as no surprise with Atomic. The toughness this stuff exhibits is next level as well. The texture it prints with virtually hides layer lines to where the parts don't even look printed. I'm definitely very pleased with this material.

Atomic Filament CARBON FIBER Nuclear Nylon v3 ReviewAtomic Filament CARBON FIBER Nuclear Nylon v3 ReviewAtomic Filament CARBON FIBER Nuclear Nylon v3 Review
MC
08/17/2022
Mark C.
United States United States
I recommend this product

Amazing

Great experience, yes it definitely is for advanced users. But once you dial in your setting and MAKE SURE THIS IS OVEN DRIED, not dry box dried you will be impressed. .15 layer height 275 degrees C Slow speeds Dialed in settings and your good to go. 750+ Rounds on the pic , no issues

Atomic Filament CARBON FIBER Nuclear Nylon v3 ReviewAtomic Filament CARBON FIBER Nuclear Nylon v3 Review
KD
06/18/2022
KEVIN D.
United States United States
I recommend this product

Finer than frog hair split four ways

I seldom write reviews (good or bad). Atomic Carbon Fiber Nuclear Nylon v3 filament deserves a review. I have been running 3DP for 15 years but I had not tried CF or nylon filament. Reading all of horror stories about warping, poor bed adhesion, soaking up moisture, etc kept me from giving it a try. I bought a roll because I needed a bunch of really strong parts. I figured the expense would be worth it if I could get it print correctly. The instructions say to put glue stick on the build plate. I thought it might work without it. I was wrong. Glue stick is required. The first print lifted off the bed and failed. The next 8 prints - running one at a time, 12 hours each, turned out beautiful and incredibly strong. You would need to look very hard to see any layer lines (.20 layers, .4 nozzle). I have owned and run most of the 3D printers and filaments out there. It takes a lot to impress me. If you haven't tried CF nylon, then I would say give it a go. It is expensive - no two ways about that. But, it is top quality and made in the USA. I ordered 3 more rolls because I never want to be without a bunch of this filament on-hand.

Atomic Filament CARBON FIBER Nuclear Nylon v3 ReviewAtomic Filament CARBON FIBER Nuclear Nylon v3 ReviewAtomic Filament CARBON FIBER Nuclear Nylon v3 ReviewAtomic Filament CARBON FIBER Nuclear Nylon v3 ReviewAtomic Filament CARBON FIBER Nuclear Nylon v3 Review
Facebook retargeting pixel

We Also Recommend