Menu
Cart

CARBON FIBER Nuclear Nylon v3

19 reviews

MFG Atomic USA

  • $ 8999


Extreme Duty Carbon Fiber Black Nuclear Nylon v3 (Read complete page please)

 Available in ONE Pound & 1 Kilo (2.2 lbs) Black

 Nuclear Nylon Technical data (TDS) click here

This nylon is exceptionally stiff & strong and EASY to print with little to no warpage.

Prints exceptionally well with warm (60C) glass coated with PVA or Magigoo. Each roll includes a reusable moisture indicator card.

Engineering grade alloyed PA Copolymer resin, adhesion promoters , impact modifiers & USA made premium MILLED carbon fiber NOT powder or dust.

 

Filament and parts are NOT overly brittle like some other CF products. Excellent for professional looking & strong technical prints.

 

****This product is intended to be printed by EXPERIENCED NYLON users with the capability to store and handle nylon filaments while keeping them DRY / being able to DRY them when needed. This product must be stored properly and kept dry BEFORE AND DURING PRINTING, moisture will result in weak/failed prints and not valid for warranty claims.**** 

**PRODUCT IS SHIPPED DRY AND READY TO USE WITH A REUSABLE MOISTURE INDICATING CARD**

 NUCLEAR NYLON SDS SHEET CLICK HERE

Carbon fiber infused filament benefits:

  • Massive increase to rigidity / strength
  • Highly desirable texture / look
  • Greatly reduced part shrink / warp
  • Greatly reduced stringing / angel hairs
  • Printed parts hold better details / sharp corners

 

Quality / Specs

 Print nozzle temp -  260-280C

       Print nozzle size -  0.40mm minimum or 0.50 or larger is best

       Print Speed - 35 to 45 mm sec. - Hardened nozzle recommended.

 Heated Bed temp - 60c - Glass with PVA or Magigoo OR other nylon friendly adhesion platforms.

 Diameter (volumetric variation XY combined) + - 0.05mm or better

 Roundness ( ovality ) + - 0.04 mm or better

* this product is abrasive to print nozzles / hardware.

Customer Reviews
4.7 Based on 19 Reviews
5 ★
89% 
17
4 ★
0% 
0
3 ★
5% 
1
2 ★
5% 
1
1 ★
0% 
0
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • stuff
  • warping
  • nylon
  • Atomic
  • filament
  • PETG
  • prints
  • strength
  • applications
  • problem
SG
11/19/2021
Scott G.
United States United States
I recommend this product

CARBON FIBER Nuclear Nylon v3

Printed relatively large objects on Prusa MK3 without any problems. Very strong slightly rough texture. Used sapphire nozzle. Used around 265 degrees for hotend and 65 for plate. Over 24 hour print no issues.

11/23/2021

Atomic Filament

I love the feedback for our community, they love that!

J
11/14/2021
Jules
United States United States
I recommend this product

Fantastic product. When can we get some without the CF?

When you need CF nylon filament, this is the one to get. Printed flawlessly, didn't warp, good layer adhesion when printed according to recommended settings, and (unlike 3DXTech CF Nylon) it never clogs in my 0.8mm nozzle. But I sometimes need a nylon filament that doesn't have the abrasive properties of CF. Nylon is often the best choice for plastic gears, specifically because its low friction coefficient reduces wear. I hope Atomic will consider making a non-CF nylon filament.

11/15/2021

Atomic Filament

Great feedback for our community Jules. Appreciate it.

MB
10/28/2021
Mark B.
United States United States
I recommend this product

Excellent material

This material took the minimum amount of effort to develop a recipe for and produced some of the strongest calibration prints I've had. I'm looking forward to finding applications for it!

Atomic Filament CARBON FIBER Nuclear Nylon v3 Review
10/28/2021

Atomic Filament

Really appreciate the photos. Our community loves to see it in real life!

A Atomic Filament Customer
WK
09/28/2021
William K.
United States United States
I recommend this product

So easy to print and so strong

Fantastic experience! I had been struggling with matterhackers NylonX for weeks. Major warping no matter what I did. I scoured the internet and tried all sorts of things and in the end could not get an involute gear of a 2” diameter to work out. Always warping at around 8 to 10 layers. Then in desperation I bought the Atomic Nuclear Nylon and the others stuff is trash. All that wasted time. I love the Nuclear Nylon!

10/01/2021

Atomic Filament

Bill, that is fantastic news. We work really hard to make the best filament, right here in Indiana!

CN
09/11/2021
Christopher N.
United States United States
I recommend this product

Layers delaminating

I have been trying for several weeks now to get a solid print. The parts look incredible. But any pressure what so ever. Even finger strength, the layers delaminate. I have tried every variation or temp, height, flow speed, chamber temp and moisture content I can possibly think of. These individual layers peel off like a sheet of paper. And they are incredibly strong. Pulling, twisting, anything. There is just no interlayer strength at all. It's so frustrating because there is so much strength being demonstrated in the individual layers. Just getting them to remain in one piece is not happening. If anyone has any ideas please contact me. I would love to have this filament in my daily use. I also need it terribly. Mountain3DPrints@gmail.com

Facebook retargeting pixel

We Also Recommend